- Plumbing
- >
- Return and Intake Adapters
- >
- Universal Water Intake or Spray Bar WITH Strainner
Universal Water Intake or Spray Bar WITH Strainner
• A universal 'U" type water intake adapter that will fit most Aquarium Canister Filters that have either 1/2" or 5/8" (approximately 12-16mm) ID Tubing to the intake side of the canister filter.
Examples include: Eheim 2215, 2215, 2217, Via Aqua 750, SunSun 402 & 303, AquaTop 300 & 400, and many many more!!
• As well the hose barb insert can be swiveled 360° for even more application possibilities such as a spray bar.
• This can also be used as a vertical water return bar to diffuse water deeper into the aquarium than our standard Return Adapter"
• Dimensions: 13" pipe with intake holes on 4 sides; 1.75" inside width to fit over aquarium.
Please note that the cap at the end can be removed so that the pipe can be cut via a hacksaw for aquariums of heights under 12" or for cleaning
• Holes on 4 sides for more than adequate flow for all canister filters this would fit
• A Pre-Filer Sponge can be slipped over intake holes for added pre-filtration (If added, we recommend adding a few windings of vinyl tape/electrical tape around the pipe near where the top of the pre-filter sponge would seat for a tighter fit)
• Please note that for 1/2" (12mm) hose, you may need to heat the tubing and lubricate the hose barb for a better fit